Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointInput / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputClock battery, save system date and time when power is off.COM2 terminal adapter for communication through the RS-422/485 connectionConverting SIO to RS-422 terminal blockInterface module for the simultaneous use of A/QnA/FX series external controllerProtection for GP rear connectors (large and small for each of the 1) Proface CA7-FIXEXM-01
CA7-FIXEXM-01 One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface CA7-FIXEXM-01. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.I/O module, including 32 point NPN/PNP input7.4 inches, installed to provide the function of dust and moisture5 Proface CA7-FIXEXM-01. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors CA7-FIXEXM-01 Proface.
Length: 3 meters. 12 way 4 digital signals into analog signals and output resultsWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA7-FIXEXM-01 Proface. (1)A veneer, for the GP4000 series back loading models of fulll flush (white, 1)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) CA7-FIXEXM-01. 10.4 inches (TFT), the replacement of the host backlight (1) CA7-FIXEXM-01 Proface. Portable GP2000H series models acceessories, RS-422 single head cable (3 m) Proface CA7-FIXEXM-01. Cable for connecting GP3000 to various modulesUsed to prevent accidental operation. Includes 3 mounting screws.