CA6-EXMCNRS10P-01 | Proface Terminal connector (10 pin) for EX module CA6-EXMCNRS10P-01

15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.I/O module, including 32 point NPN/PNP inputPortable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).AUX connector for external output (5 / set) Proface CA6-EXMCNRS10P-01. The module is used for mounting on the back board of the GLC2000 series host computer CA6-EXMCNRS10P-01 Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface CA6-EXMCNRS10P-01. (1)Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Used to prevent accidental operation Proface CA6-EXMCNRS10P-01. Includes 3 mounting screws.10.4 inches (TFT), replace the backlight (2 / set)The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA6-EXMCNRS10P-01 Proface. Portable GP2000H series models accessories, RS-232 single head cable (3 m).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA6-EXMCNRS10P-01 Proface. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Portable GP2000H series models accessories, RS-232 single head cable (10 m) CA6-EXMCNRS10P-01 Profaace CA6-EXMCNRS10P-01. Touch screen anti ultraviolet protective film (1 pieces).For the elastic display module installation nut wrench (1 / set).Touch screen anti ultraviolet protective film (1 pieces).B/B+/C FLEX NETWORK Type connector (5)CCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) Proface CA6-EXMCNRS10P-01.