CA6-EXMCNHE20P-01 | Proface CA6-EXMCNHE20P-01 MIL connector (20 pin) for EX module

GP3000H replacement label (5 sheets / set)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.Used to convert RGB to DVI-A5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface CA6-EXMCNHE20P-01 CA6-EXMCNHE20P-01 Connector for connecting a serial port (1)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA6-EXMCNHE20P-01.
Length of 5 meters. 3.4 Inch Touch Screen anti UV protective film (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).4.3 Inch Touch Screen anti UV protective film (1 pieces).10.4 inches (STN), the replacement of the host backlight (2 / set).GP2500S useFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface CA6-EXMCNHE20P-01. 7.4 inches, installed to provide the function of dust and moistureDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.12.1 inches, replace the backlight (1 / set)Used in a variety of host and man-machine interface for RS-422 connectionFor connecting GP operation data with RS-422 and power /DIO terminals CA6-EXMCNHE20P-01 Proface CA6-EXMCNHE20P-01 Proface. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).7.4 inches, replace the backliight (1 / set)Standard cable for connecting GP3000H adapter and GP3000H CA6-EXMCNHE20P-01 Proface CA6-EXMCNHE20P-01.
Length: 3 meters. Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointFor 3.8 inch models, prrevent cable loose from the USB cable fastening clip (5 / set) Proface CA6-EXMCNHE20P-01. LT seal on the control panel.The MITSUBISHI Q series PLC is connected to GP, length: 5 m.