FN-AD02AH41 Proface 2 channel A/D conversion module

When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).The main controller is connected to the man-machine interface for MPI communicationScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceConverting SIO to RS-422 terminal blockScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceReplaceable anti fouling film for protecting screen protective film (5 sheets / cover) FN-AD02AH41 Proface FN-AD02AH41 A veneer, for the GP4000 series back loading models of full flush (white, 1)5.7 inches, installed to provide the function of dust and moisture5.7 inches, replace the backlight (1 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter FN-AD02AH41 Proface.
Length of 10 meters. 10.4 inch screen protective cover (1 pieces)Portable GP2000H series models accessories, RS-422 single head cable (3 m).Suitable for A/B+ Type modelsFor 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices FN-AD02AH41 Proface. (5 / set)Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).10.4 inches (STN), the replacement of the host backlight (2 / set).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).The moodule is used for mounting on the back board of the GLC2000 series host computer FN-AD02AH41. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.With the installation of screws (44 / sets), for the GP4000 series back mounted to the fixed panel models FN-AD02AH41. (2 / set)For connecting GP operation data with RS-422 and power /DIO terminals.