FN-DA02AH41 | Proface 2 channel D/A conversion module FN-DA02AH41

Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Connect to PC, transfer screen data and user programs.Portable GP2000H series models accessories, RS-422 single head cable (3 m) Proface FN-DA02AH41. USB cable to prevent disconnection of the fastening clip (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface FN-DA02AH41Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationFor the elastic display module installation nut wrench (1 / set).13 pin input connectors for HTB and 16 pin output connectors Proface FN-DA02AH41. (1 / set)Converting SIO to RS-422 terminal blockPortable GP2000H series models accessories, RS-232 single head cable (10 m).Used to output the image signal from the host computer to GPI/O module, including 32 point NPN/PNP inputUSB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)2 / setsThe MITSUBISHI A series PLC is connected to GP, length: 5 m Proface FN-DA02AH41. For the DVI input to GP3000(serial communication terminal adapter is included in the product package)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationEngineering documents created by the LT interface to download images and logic programming software through the USB interface FN-DA02AH41 Proface FN-DA02AH41 Proface. Length: 5 meters.Used to install the GP3000H series to a commercially available support arm or pannel FN-DA02AH41. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters FN-DA02AH41 Proface. Touch screen anti ultraviolet protective film (1 pieces).Data transmission cable between host and LT series Proface FN-DA02AH41. Length: 5 meters.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.