Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output
12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Suitable for A/B+ Type modelsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface FN-XY16SC41. (1)LT fasteners installed on the control panel (4 / set)10
FN-XY16SC414 inches (TFT), the replacement of the host backlight (1).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface FN-XY16SC41. (1)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceExtension cable for connecting USB (Mini-B) interface to front panel.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communication12 way 2 digital signals into analog signals and output resultsUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface FN-XY16SC41.
Length: 10 meters. 7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)GP3000H replacement label (5 sheets / set)Protection for GP rear connectors (large and small for each of the 1) FN-XY16SC41. Used to convert RGB to DVI-ALT seal on the control panel.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.3.5 inch screen protective cover (1 pieeces)Connect to USB printer (Type-B) FN-XY16SC41. Used in a variety of host and man-machine interface for RS-422 connectionConnector for connecting DC power cord (5)