Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-E series
>> MR-E-10A-KH003 MITSUBISHI Servo amplifier
MR-E-10A-KH003 MITSUBISHI Servo amplifier
Brand:
MITSUBISHI
Name: Servo amplifier
Model: MR-E-10A-KH003
Type: general purpose AC servo amplifier MR-E series.
Rated output: 0.1kw.
Interface type: general purpose pulse interface.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.
...More relevant models >>>>
Name: Servo amplifier
Model: MR-E-10A-KH003
Type: general purpose AC servo amplifier MR-E series.
Rated output: 0.1kw.
Interface type: general purpose pulse interface.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.
Motor: HA-SH type.
Power: 1.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-E-10A-KH003 MITSUBISHI.
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field MR-E-10A-KH003
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed. Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1500rpm.
With the brake: without MR-E-10A-KH003 MITSUBISHI.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MR-E-10A-KH003 MITSUBISHI. Motor series: low inertia, medium power.
Rated output power: 30.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. Motor: HA-SH type.
Power: 2.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a steplesss speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-E-10A-KH003.
The rotor speed of the induction motor is always slightly lower than that of the rrotating magnetic field MR-E-10A-KH003.
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed.
Power: 1.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-E-10A-KH003 MITSUBISHI.
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field MR-E-10A-KH003
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed. Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1500rpm.
With the brake: without MR-E-10A-KH003 MITSUBISHI.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MR-E-10A-KH003 MITSUBISHI. Motor series: low inertia, medium power.
Rated output power: 30.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. Motor: HA-SH type.
Power: 2.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a steplesss speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-E-10A-KH003.
The rotor speed of the induction motor is always slightly lower than that of the rrotating magnetic field MR-E-10A-KH003.
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed.
...More relevant models >>>>
Last one: MITSUBISHI Multi axis servo amplifier expansion unit MR-J2M-D01
next one: MITSUBISHI Servo amplifier MR-E-20A-KH003
Related download