LK166
Home >> Products >> Proface >> man-machine interface accessories >> CA3-CBLQ-01 Proface MITSUBISHI Q series CPU PLC connection cable (5 m)

CA3-CBLQ-01 Proface MITSUBISHI Q series CPU PLC connection cable (5 m)

Brand: Proface
Name: MITSUBISHI Q series CPU PLC connection cable (5 m)
Model: CA3-CBLQ-01
COM1 interface with the cable for direct connection to the CPU series PLC Q

Digital small keyboard with USB interface.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.A veneer, for the GP4000 series back loading models of full flush (white, 1)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) CA3-CBLQ-01 Proface. Direct interface Matsushita Electric PLC FP series CPU port.The main controller is connected to the man-machine interface for MPI communication10 CA3-CBLQ-014 inches (TFT), the replacement of the host backlight (1).The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side CA3-CBLQ-01 Proface. Apply to GLC-2600/2500Backup battery for time and data backup (1).Used to prevent disconnection. (1 interface, 5 / set)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals CA3-CBLQ-01 Proface. The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).7.0/7.5 inch screen protective cover (1 pieces)Used to prevent accidental operation. Includes 3 mounting screws.Clock battery, save system date and time when power is off.Connector for connecting DC power cord (5 / set).The PC adapter for PCMCIA slot read CF card required.15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joinnts C and D different CA3-CBLQ-01. Cable for connecting GP3000 to various modulesDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.CFast cards (32GB, SLC,) inserted in the CFast slot for storagee CA3-CBLQ-01. 10.4 inch screen protective cover (1 pieces)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.


...More relevant models >>>>