CA7-USBAT-01 USB cable fastener Proface CA7-USBAT-01

When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Slave station module for connecting support for CANopenI/O expansion module, including the 8 point relay /1 public end12 way 4 digital signals into analog signals and output resultsStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA7-USBAT-01 CA7-USBAT-01
Length of 5 meters. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Converting 2 analog signals into digital signals12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface CA7-USBAT-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.(serial communication terminal adapter is included in the product package)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface CA7-USBAT-01. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)For 3 CA7-USBAT-01 Proface. 8 inch models, connect the connector to the DIO interface. For connecting external I/O devices CA7-USBAT-01 Proface. (5 / set)Used in a variety of host and man-machine interface for RS-232C connectionTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B)) CA7-USBAT-01. Adapter for EX module (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA7-USBAT-01 Proface. (1)5.7 inch screen protective cover (1 pieces)A veneer, forr the GP4000 series back loading models of full flush (white, 1)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface CA7-USBAT-01.