GP2000H-AP422 | Proface GP2000H-AP422 RS-422 GP2000H adapter

USB cable to prevent disconnection of the fastening clip (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.10.4 inches (TFT), the replacement of the host backlight (1) Proface GP2000H-AP422. A veneer, for the GP4000 series back loading models of full flush (white, 1)For 3 GP2000H-AP4228 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeFor multi connection communication, length: 5 meters.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface GP2000H-AP422. The main controller is connected to the man-machine interface of the host, for MPI communication2 / setsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).The main controller is connected to the man-machine interface for MPI communicationReplaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface GP2000H-AP422. One end is a loose wire, which is used to carry out RS-232C connection between the host and LT GP2000H-AP422 Proface. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine GP2000H-AP422 Proface. Connector for connecting DC power cord. (right angle, 5 / set)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.Used to display analog RGB (2 channels) on the GP3000The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail GP2000H-AP422 Proface GP2000H-AP422. Cable for connecting GP3000 to various modulesThe PC adappter for PCMCIA slot read CF card required Proface GP2000H-AP422. 10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).