Home
>> Products
>> Proface
>> man-machine interface accessories
>> GP2000H-C422-10M Proface RS-422 single head cable
GP2000H-C422-10M Proface RS-422 single head cable
Brand:
Proface
Name: RS-422 single head cable
Model: GP2000H-C422-10M
Portable GP2000H series models accessories, RS-422 single head cable (10 m).
...More relevant models >>>>
Name: RS-422 single head cable
Model: GP2000H-C422-10M
Portable GP2000H series models accessories, RS-422 single head cable (10 m).
When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).The MITSUBISHI A series PLC is connected to GP, length: 5 m.2 / setsTouch screen anti ultraviolet protective film (1 pieces).The PC adapter for PCMCIA slot read CF card required GP2000H-C422-10M Proface. A1/A2/B+ DIO Type connector (compression type) (5 / set)Standard cable for connecting GP3000H adapter and GP3000H GP2000H-C422-10M
Length: 5 meters. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (STN), the replacement of the host backlight (2 / set) GP2000H-C422-10M Proface. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.LT seal on the control panel.The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface GP2000H-C422-10M Proface. Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.For the elastic display module installation nut wrench (1 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Protection for GP rear connectors (large and small for each of the 1).2GB, for the implementation of the picture save, log and data backup and other data managemennt operations, such as compression flash memory card GP2000H-C422-10M. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)1-0 DVI standard (DVI-D 24 pin convex connector)AUX connector for exteernal output (5 / set) GP2000H-C422-10M. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.
Length: 5 meters. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (STN), the replacement of the host backlight (2 / set) GP2000H-C422-10M Proface. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.LT seal on the control panel.The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface GP2000H-C422-10M Proface. Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.For the elastic display module installation nut wrench (1 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Protection for GP rear connectors (large and small for each of the 1).2GB, for the implementation of the picture save, log and data backup and other data managemennt operations, such as compression flash memory card GP2000H-C422-10M. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)1-0 DVI standard (DVI-D 24 pin convex connector)AUX connector for exteernal output (5 / set) GP2000H-C422-10M. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.
...More relevant models >>>>
Last one: Proface RS-422 single head cable GP2000H-C422-3M
next one: Proface RS-422 cable with D-Sub connector GP2000H-D422-3M
Related download