GP2000H-D422-10M | Proface RS-422 cable with D-Sub connector GP2000H-D422-10M

COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceStandard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface GP2000H-D422-10M. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module GP2000H-D422-10MReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)5.7 inches, replace the backlight (1 / set)10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface GP2000H-D422-10M. Length: 5 meters.3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.COM2 adapter for converting the COM2 interface to the RS-422 terminal blockOMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m Proface GP2000H-D422-10M. Cable for connecting GP3000 to various modulesThe man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceUSB cable clamp for preventing disconnection of connection (5 / set)Durable cable for connecting GP3000H adapter and GP3000H GP2000H-D422-10M Proface GP2000H-D422-10M Proface. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Used for surface protection of man-machine interface from oil and chemical pollution (5 / sset) GP2000H-D422-10M. Use external output for the GP3000 series of auxiliary connectors (5 / sets) GP2000H-D422-10M Proface. 7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust annd oil pollution (5 / set) Proface GP2000H-D422-10M. The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.