CA3-CBLMLT-01 Proface Multi-Link connecting cable (5 m)

Touch screen anti ultraviolet protective film (1 pieces).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)Connect to PC, transfer screen data and user programs CA3-CBLMLT-01 Proface. For the elastic display module installation nut wrench (1 / set) CA3-CBLMLT-01Connector for connecting DC power cord (5 / set).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface3 CA3-CBLMLT-01 Proface. 5 inch screen protective cover (1 pieces)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Converting 4 analog signals into digital signalsCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) CA3-CBLMLT-01 Proface. Converting 2 analog signals into digital signalsDigital small keyboard with USB interface.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceThe PC adapter for PCMCIA slot read CF card required.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Touch screen anti ultraviolet protective film (1 pieces).7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / seets) CA3-CBLMLT-01. Cable for connecting GP3000 to various modulesWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).The module is used for mounting on the back board of the GLC2000 series host computer CA3-CBLMLT-01. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.