PFXZCBDS102 10 inch screen protective film Proface PFXZCBDS102

10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Touch panel operation for RGB input modules (Master - from: Mini-B)Connector for connecting DC power cord. (right angle, 5 / set)10.4 inch screen protective cover (1 pieces)Extended cable for connecting USB (Type-A) (LT) interface Proface PFXZCBDS102. 3.5 inch screen protective cover (1 pieces)Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Touch screen anti ultraviolet protective film (1 pieces) PFXZCBDS102Used to display analog RGB (2 channels) on the GP3000Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface PFXZCBDS102. Up to 7 EX modules can be connected.GP4000 series back mounted model of waterproof rubber gasket. (1)Touch screen anti ultraviolet protective film (1 pieces).Extension cable for connecting USB (Mini-B) interface to front panel.Used to prevent disconnection. (1 interface, 5 / set)Used to prevent accidental operation. Includes 3 mounting screws.For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface PFXZCBDS102. Length: 5 meters.Used to install the human machine interface to the fixed panel (2 / cover).For RGB input USB cable to prevent disconnection (2 / set)Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorUsed to install the human machine interface to the fixed panel (2 / cover) PFXZCBDS102 Proface PFXZCBDS102 Proface. Cable for connecting GP3000 to various modulesThe main controller iss connected to the man-machine interface for MPI communicationNETWORK FLEX 64 point DIO connector terminal block, (including 2)(serial communication terminal adapter is included in the product package)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine PFXZCBDS102 Proface Proface PFXZCBDS102 PFXZCBDS102. Protection for GP rear connectors (large and small for each of the 1).