PFXZCETWHA1 EZ series lamp (with base) Proface PFXZCETWHA1

For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationCFast cards (32GB, SLC,) inserted in the CFast slot for storage.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface PFXZCETWHA1. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) PFXZCETWHA1Touch screen anti ultraviolet protective film (1 pieces).10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Adapter for EX module (5 / set)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface PFXZCETWHA1.
Length: 3 meters. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) Proface PFXZCETWHA1. Suitable for LT4000M/GP4000M series modules, 3.5 inch.15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different PFXZCETWHA1 Proface. Extended cable for connecting USB (Type-A) (LT) interface.LT4000M (module type DIO), NPN output, DC24V (host).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface PFXZCETWHA1 Proface. To prevent the connection of disconnected USB cable fasteening clips (Mini-B USB, 1 interface, 5 / set)For 3 PFXZCETWHA1. 8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) PFXZCETWHA1 Proface. I/O expansion module, including the 8 point relay /1 public endThe MITSUBISHII A series PLC is connected to GP, length: 5 m Proface PFXZCETWHA1. Suitable for A/B+ Type modelsA veneer, for the GP4000 series back loading models of full flush (white, 1)